Microsoft Surface Table: 3D Modelling and Touch Controls

Microsoft Surface Table: 3D Modelling and Touch Controls Background and Context Three Dimensional (3D) Modelling is the process of creating a 3D representation of any surface or object by manipulating polygons, edges, and vertices, in simulated 3D space ­1. 3D modelling is used in many different industries, including virtual reality, video games, TV and motion pictures. 2A 3D modelling software generates a model through a variety of tools and approaches including: Simple polygons. 3D primitives simple polygon-based shapes, such as pyramids, cubes, spheres, cylinders, and cones 3Spline curves a curve that connects two or more defined specific control points. 3NURBS (non-uniform rational b-spline) Computationally complex, smooth shapes designed by bezel curves. Scope and Objectives In this project, the 3D model produced, was the 5G Innovation Centre at the University of Surrey. The final version of the prototype is supposed to be a model of the whole University campus, which would be able to display the temperature, noise levels, and a few other statistics in every single area on the map. In order to record data, an IoT Desk Egg4 was created. This Desk Egg is a multi-sensor suite with feedback mechanisms and wireless communication capabilities. Using this Desk Egg, environmental data, such as light, sound, temperature, noise, humidity, dust density are measured and recorded. Separately, these recordings have limited value, but when combined, and analysed in aggregate, the sensors provide a rich context of its immediate surroundings. 5The objective of this project is to enhance the model with touch navigation capabilities, similar to 3D navigation on a mobile phone or tablet. The current model is constructed for a Samsung SUR40 touch table, running Microsoft Surface. The model has been implemented using PixelSense and in addition, Microsoft Surface Game Studio 4.0 and the Window Presentation Foundation (WPF). To go about enhancing the model, investigations would have to be established, on what changes would be involved to implement touch navigation, before implementation and testing of the aforementioned varieties. Introduction[SO1] Microsoft PixelSense 6Microsoft PixelSense orientation capabilities are used and seamlessly integrated into the application, which also supports multiple simultaneous touch points. The Samsung SUR40 can only run Windows 7, as the Surface SDKs are only fully supported on Windows 7 and not any newer Operating System. Window Presentation Foundation To initiate an application for any Microsoft Surface devices, especially for the PixelSense, the Microsoft Surface Game Studio 4.0 and Window Presentation Foundation (WPF) are required. Rowe (2012) shows a few points that can assist a developer to innovate and create a great application for the Samsung SUR40 Surface Table.7 Implement a darker background as it does better with quality during contact. Multiple screen interactions, in which, the users finger and objects, can be detected. Actions only must be interacted by the users fingers to avoid detection errors, and adding sound effects, acknowledging the users finger interaction, should be done. Ensuring the user immerses into an outstanding experience from the application. Since the PixelSense has 4 corners, it will be more convenient for users to be able to turn the orientation of the application, while offering an easy means of leaving the application. The points of interaction with the application, should be well sized and well-spaced, to prevent manipulation errors during input. Working with Touch Input To implement the 3D touch controls, a key prerequisite for the project is the availability of touch control capability. Using the System Information app, which could be launched from the Run dialog box, with the syntax msinfo32.exe. As seen from the image below, the Samsung SUR40 Surface Table, has 52 individual touch points. This confirms that the table supports the touch interaction and the touch framework is ready to use. Fig 1. The Run dialog, with the corresponding syntax, used to launch the system information window. Fig2. A System Properties window, showing the details on the touch capability. The initial edition of the 3D modelling software has sub-par touch navigation controls, but it makes up in the availability of buttons which are mapped to specific viewing points of the model. Having these buttons provides a way of navigating through, but lack the fluidity of the touch input system you would get from any other 3D modelling software. Fig 3. An image showing the initial edition of the source code, with buttons. Development Environment In order to be able to work on this project, a few software programs have to be installed. These software programs are specifically required to create an application for a Microsoft PixelSense device. These include: Windows 7 Microsoft Visual Studio 2015 Microsoft XNA Framework Redistributable 4.0 Refresh Microsoft XNA Game Studio Platform Tools Microsoft Surface 2.0 SDK Microsoft Surface 2.0 Runtime GitEXT Windows 7 Windows 7 is the latest operating system that the Surface SDK supports, hence, all the programming done, had to be on a PC running Windows 7. Running these programs on a Windows 10 PC, gives an unfixable error. A Windows 7 license had to be purchased. Microsoft DreamSpark provides a free license to the University of Surrey students. Using the downloaded ISO file, a USB boot key was made, using DiskPart, so as to dual boot Windows 7 on the laptop used. Using DiskPart, empties the flash drive of all its contents, its advisable to use an empty drive, or back up its contents. Fig 4. The error shown when the program is being opened on a Windows 10 PC. Fig 5. Image showing the free purchase of a Windows 7 Operating System, using DreamSpark. DiskPart is the Windows built in disk management program, using CMD to call it, the following syntaxes will create a custom USB key for any appropriately sized flash drive: List disk This lists out all the disk drives connected to the system, and their sizes, with disk numbers Disk ###, for easier disk reference. After finding your particular disk, use select disk x, x being the respective number of your disk. This basically tells the program you plan on working on this disk. Clean This clears your drive of previous configurations and empties it. Create partition primary This creates a primary partition on the cleaned drive. Select partition 1 This selects the recently created partition. Active this sets the selected partition as an active partition. Format fs=fat32 This syntax formats the flash drive to a requested file system. In this example, the file system being FAT32, the legacy file system recognizable by most BIOS (Basic Input Output System) firmware. Fig 5. The image shows the procedure for creating a USB Key, Disk 2. Visual Studio 2015 Microsoft Visual Studio 2015 is now a free software, but for the Enterprise version, a key is needed, but as a University of Surrey student, one is provided free of charge, under the DreamSpark account. Fig 6. Image shows free purchase of Visual Studio Enterprise, using DreamSpark. Microsoft XNA Framework and Microsoft Surface SDK A Microsoft Surface SDK installer was downloaded and installed, as an extension, for the Visual Studio 15 suite. This enables Visual Studio to compile on the Microsoft Surface XNA Game Studio framework. The installer sets up two important frameworks, which are the Microsoft Surface WPF and Microsoft Surface XNA Game Studio 4.0. These frameworks are applied to help developers with the creation of two-dimensional (2D) and three-dimensional (3D) applications respectively. A successful install will show something like this, when creating a new project in Visual Studio. Fig 7. The image shows a properly installed XNA Game Studio Framework. GitEXT GitEXT is an extension for windows, that helps manage a git repository. The programs source code had to be worked on alongside a few colleagues, as they had other objectives in terms of updating the 3D Modelling software. Using a git repository, helps with management of different modifications and changes between different editors of the same source code. Fig 8. The image shows an installed git extension for version management. Camera Movement Running a camera location around an object is a concept of projecting different views from different positions for audiences. It is an essential task for the developer to implement this concept in the application. In order to implement, a series of matrix calculations are required to move the camera from its current position to a desired place and display the object with high quality and performance. The current camera, as stated earlier, seen in Fig 3, has a fixed position, and does not move around the model, rather, there are fixed points in camera can be. These points are controlled by the arrow buttons. To fix this problem the touch framework has to be implemented. Touch Gesture The touch functionality of the program depended on raw input, and only moved the model round a fixed point. The method of implementation made navigation with the touch screen, somewhat ineffective. The XNA framework installed, comes with a touch input namespace namely Microsoft.Xna.Framework.Input.Touch. After extensive research on this library namespace, using this namespace made implementing a new gesture-based, touch framework for the code straightforward. The namespace provides support for gestures like tapping, double tapping, horizontal drag, and a few others. Development After researching various libraries and namespaces for a substantial understanding of the initial source code, coding began. During initial coding, it was discovered that the method of navigating the model, was rotating the camera round a fixed object, as it gives the same illusion as the model moving round its axes, as opposed to the manipulation of the model itself in front of an immovable camera. Using this logic, the touch code had to manipulate the cameras movement and not the movement of the model. While implementing the touch framework, a few redundancies were removed, such as the buttons used in moving the camera and a few others, to provide for a more immersive experience when using the 3D model. Fig 9. The image shows the 3D model with redundancies removed.

What is multimeter

The multimeter that is commonly called as multitester is also known as VOM or volt/ohm meter is an electronic measuring device that has the capacity to measure the current, resistance and the AC or DC voltage accurately. This device is very important in troubleshooting electrical problem it is either in industrial or household apparatus such as appliances, batteries, motor controls, switches, power supplies and wiring system. A post office engineer in the early 1920 invented the multimeter and he is Donald Macadie. There are two main types of multimeters, the analog and the digital. An analog multimeter represents the amount of current, voltage, or resistance using its moving pointer over a printed scale and needs an interpretation, while a digital multimeter has numerical displays that indicate a straightforward decimal read out of the three quantities. A digital multimeter seems more accurate and precise than an analog because in analog, parallax error can be encountered while in digital it shows automatically the exact value with the right range set. Just like with the common device, multimeter has basic parts also. They are meter scale, test probe, pointer adjusts, selector function range, and zero adjust for ohmmeter. In using any apparatus, safety must think first. When using the multimeter, one must be responsible and aware enough in getting the amount of the quantities. As for example, it is not possible to measure voltage in the current based setting because it may short due to low resistance or can cause explosion. That’s why, see to it that there is a fuse before using the multimeter and the insulation of the probes and wires for safety and prevention purposes. For troubleshooting purposes, one must confirm that the internal battery is not flat and the internal fuse is still working; the probes should be in the right socket and polarity; lastly, observe the correct dial setting. Nowadays, some of the advanced models of a multimeter can measure inductance, temperature, duty cycle, capacitance and frequency. It can also test or try diodes and transistor. This multimeter can also be used as an oscilloscope. For me, multimeter has many uses that could help the people who are in need of it. References All about Circuits http://www.allaboutcircuits.com/vol_6/chpt_2/1.html What is a Multimeter? http://www.wisegeek.com/what-is-a-multimeter.htm What is a digital multimeter? http://www.wisegeek.com/what-is-a-digital-multimeter.htm What is a multimeter? www.tech-faq.com/multimeter.html

Top American Revolution Essay Topics Tips!

Top American Revolution Essay Topics Tips! Ferling's book gives a comprehensive account of the military area of the uprising. The principal reason for revolution was economics. With this much available land, America managed to expand military-wise. Americans fought to receive their own independence. Together with the topics, you'd discover loads of papers free of charge. Here, you'll discover topics that push students to consider what resulted in slavery and the way it was justified by those who perpetuated it. Downloadable PDF Scholarships Open to all students, the DAR presents numerous scholarships for a huge selection of unique programs and regions of study. So now you understand that the very best resolution is to get essay papers. You must be proficient in the topic, have an overall idea about the chosen issue and figure out how to get the best arguments to show your thesis. The amendment still has to be ratified. Another benefit of our website is the quickness. If it's so, then you'll be having some challenging time for a student together with being a writer. You should have your reasons, and our principal concern is that you wind up getting a great grade. You should find the right set up for your house and get it installed. All About American Revolution Essay Topics The American Revolutionary War is the most essential historic event in the United States of america. In summary, it's clear that Shay Rebellion wasn't the last battle of the American Revolution based on a succession of events that have taken place since then and in the past few years. Imagine yourself as an early American and think of what would make you wish to visit war. It was, instead, a succession of events that resulted in the war. No single event led to the revolution. The events following the outbreak of the war resulted in the development of civil wars in the united states. You may also get several discounts on our site which will help you to save some more money for future orders or anything you want to spend them on. In any case, you'll certainly like our price policy. Explore the value of French aid to American troops. Talk about the effect of this document. A revolution essay can concentrate on the entire change from 1 constitution to another. An American Revolution essay isn't a paper you will write within a week. The statement The main reason for the American Revolution is economics. Revolution in the new world is an excellent topic for a customized revolution essay. The Basic Facts of American Revolution Essay Topics In case you hav e any questions, please don't hesitate to speak to us as we are here in order to help. If you're feeling this way it's excellent advice to calm your excitement and concentrate on the job at hand. The actual folks highly praise our essay help site. You can rely on the very best essay help online. Despite the fact that you pay for homework, we provide those options at no cost. Detecting a mechanic is just what you want to do. Whenever you opt to ask us for skilled support, don't hesitate to get in touch with our support managers. What all you will need is getting the assistance from a specialist and EssaysChief is going to be the expert that you seek out. Local chapter contacts are the very best resource to learn more on the educational programs offered in the neighborhood community. You're able to verify this information on the web. Nowadays you have the ability to choose from an actual top list! Local chapters can provide more sophisticated information regarding the programs in their particular communities. Unfortunately, when any actual money on-line casino in the USA is sold to another company this whole process has to be repeated. Normally, it takes as much as two hours of time to comb through dozens of sites until you discover something exciting to write about . The crucial feature is the fact that it's extra absolutely free chips and credits added to the starting balance at no cost. There are big benefits of gambling online rather than live games at land-based casinos. We'll manage them, and for a fair price, as we understand that students typically don't have plenty of money to spare. There exists a wide variety of agencies that are very similar to ours. Women don't require property or maybe to continue to keep their wages and belongings. Students lead busy lives and frequently forget about a coming deadline. There's, naturally, a limit on the range of pages even our finest writers can produce with a pressing deadline, but usually, we can satisfy all the clients seeking urgent assistance. 1 day it can be the very same in the US but as of now there is actually no indication of change coming soon. After returning to Glasgow, we'll have the time to learn more about the city and locate an amazing restaurant for dinner. This is done so you've got more time to unwind and play without the load of worrying about your final choice.

International Business Entry Modes - 1458 Words

Introduction An international entry mode is an institutional agreement necessary for the entry of a company’s products, technology and human capital into a foreign country or market. The reluctance of firms to change entry modes once they are in place, and the difficulty involved in doing so, make the mode of entry decision a key strategic issue for firms operating in today’s rapidly internationalizing market place. The choice of mode will depend on internal characteristics (eg firm size, international experience) and external characteristics (eg the sociocultural distance between the host country and the home country) as well as the trade-off between desired mode characteristics (risk adverse, control and flexibility). The diagram†¦show more content†¦Contract manufacturing- where manufacturing is contracted to an external foreign partner provides a low risk and potentially low cost mode of entry. Benetton and Ikea are a good example of companies who successfully rely on a contractual network of small overseas manufacturers. Benetton has over 80% of its production outsourced to 450 contractors (located in low cost production countries such as India and China). As a result of the money saved on labour, Benetton can sell products 20% cheaper, helping it to maintain a low cost position in comparison to competitors. Of course, this method may not be appropriate for every company as there i s a loss of knowledge and intellectual property rights, and the transaction costs involved must also be considered. Licensing differs from contract manufacturing in that more value chain functions have been transferred to the licensee. In outsourcing production and downstream activities a licensor firm can concentrate on its core competences and therefore will remain technologically superior in its product development- for example Apple licenses its brand to manufacturers of accessory products, and the BBC licenses rights to broadcast TV shows around the world. However a lack of control over licensor operations and therefore quality may lead a company to use franchising (a sub variant of licensing) in which the franchisor gives a right to the franchisee against aShow MoreRelatedEntry Modes in International Business2934 Words   |  12 Pages------------------------------------------------- | ------------------------------------------------- Received: | ------------------------------------------------- | | ASSESSMENT FRONT COVER SHEET | COURSE: | The Development of International Business since the 1870s | STUDENT NUMBER: | 2 | 1 | 8 | 5 | 9 | 4 | 1 | WORD COUNT*: | | 2 | 4 | 3 | 1 | *excluding bibliography, references and appendices Please submit your assignment to the designated submission venue. ------------------------------------------------- Read MoreEntry Strategy in International Business1593 Words   |  7 Pages9.0 Entry Strategy 9.1 Introduction Entry strategy is about the decision to enter which foreign market, when in what scale and regarding the choice of entry mode. In our case we have already decided to enter the UK market and offer our products to a selected niche initially. It is the case of entry mode we should address in this chapter. The various modes to enter foreign markets are vast. A few popular methods are, exporting, licensing or franchising to host country firms, establishingRead MoreModes of Foreign Entry Essay1599 Words   |  7 PagesAll research fully carried out on Entry nodes on the long run remain limited to large manufacturing firms. The foreign market selection and the choice of its entry modes drastically ascertain the performance of a specific firm. Entry mode can be defined as an arrangement for an organization that is organizing and conducting business in foreign countries like contractual transfers, joint ventures, and wholly owned operations (Anderson, 1997). Internationalization is part of a strategy which is goingRead MoreEntry Strategy in International Business1602 Words   |  7 Pages9.0 Entry Strategy 9.1 Introduction Entry strategy is about the decision to enter which foreign market, when in what scale and regarding the choice of entry mode. In our case we have already decided to enter the UK market and offer our products to a selected niche initially. It is the case of entry mode we should address in this chapter. The various modes to enter foreign markets are vast. A few popular methods are, exporting, licensing or franchising to host country firms, establishing jointRead MoreEntry Mode : Marketing Management868 Words   |  4 Pages4.Selection of Entry Mode Entry mode Franchising Joint Venture Greenfield Control Low Moderate High Risk Low High-moderate High Investment Low Medium High Exposure Low Moderate High Firstly, it is important to remember the current situation of Trader Joe’s in USA, the company has over 400 stores in 30 states and is the leader in customer service in USA. However, the company is not on the top ten supermarkets in sales category. Additionally, Trader Joe’s just operates in USA and does not haveRead MoreAdvantages And Advantages Of Global Business Essay1416 Words   |  6 PagesGlobal business is a thriving economical industry where goods and services are bought and sold across a number of countries. A key factor of International trade is the degree that currency and exchange thrive as the rates rise and fall. There are many disadvantages and advantages to taking a business venture overseas which can be achieved via the following mechanisms; exporting, licensing, franchising and establishing joint ventures within a host country. However deciding which entry to take isRead MoreStarbucks - Entry Modes Of Starbucks970 Words   |  4 Pagesone of the be st coffee chains and providers in the world. It was started in 1971 by 3 friends (Jerry, Zev and Gordon), they were passionate about the idea of selling fresh coffee beans. Things started to change when Schultz wanted to develop this business into coffee serving with friendly sitting environment. The idea of serving coffee along with sitting culture made a hit and started its own development in fast-paced way. According to the statics showed, Starbucks are operating 17,706 stores in moreRead MoreMcDonalds and Its Critics924 Words   |  4 Pagesfirms reputation also contributed to huge effects on its business operations and profits in 2008. McDonalds Franchising: Since the inception of the company by two brothers, McDonalds Corporation has continued to use franchising as its mode of entry into the market. Actually, the inception of McDonalds Corporation was based on franchising as the mode of market entry as the founders operated a carhop drive-in restaurant. Through franchising mode of operation, the franchiser i.e. McDonalds CorporationRead MoreFactors Influencing International Fashion Retailers816 Words   |  4 Pages Paper Critique: Factors influencing international fashion retailers entry mode choice. Lu, Y., Karpova, E. and Fiore, A. (2011) Factors influencing international fashion retailers entry mode choice, Journal of Fashion Marketing and Management: An International Journal, 15(1), pp. 58-75. doi: 10.1108/13612021111112340. Summary: The aim of the paper is to provide a theory†based framework that informs a fashion retailer s entry mode choice into a foreign market. The author highlights theRead MoreUnderstand and Critically Evaluating Entry Modes of Businesses in International Market1131 Words   |  5 Pagesinternationally in many countries. Development of worldwide integration urges companies to reach out international markets and interact with foreign customers. Businesses focus on fulfilling the demand of the market by its products or services, their focus is also increasing profit, and to achieve these goals they favor to expand their work in a foreign market. Other reasons to internationalize their business may be to become stronger than the other competitors and also to lower their expenses by getting